简体中文
RAVENOL TSi SAE 10W-40
RM56 – RM263
RAVENOL TSi SAE 10W-40 is a semi-synthetic CleanSynto® engine oil which allows an energy-saving operation because of its additivation, choice of base oils and viscosity adjustment. In order to guarantee the low viscosity of the SAE class 10W as well as a low evaporation loss RAVENOL TSi SAE 10W-40 is produced on the basis of hydro crack oils which correspond to the demands.
Viscosity: 10W-40
Specification: ACEA A3/B4, API CF, API SN Plus, API SP
Oil type: Semi-synthetic
Approvals: API SN Plus, API SP, BMW Special Oil
Recommendation: MB 229.1, MB 229.3, VW 500 00, VW 501 01, VW 502 00, VW 505 00
Application: Passenger car
Technology: Clean Synto®
RAVENOL TSi SAE 10W-40 is a semi-synthetic CleanSynto® engine oil which allows an energy-saving operation because of its additivation, choice of base oils and viscosity adjustment. In order to guarantee the low viscosity of the SAE class 10W as well as a low evaporation loss RAVENOL TSi SAE 10W-40 is produced on the basis of hydro crack oils which correspond to the demands.
Extended oil change intervals according to manufacturer’s instructions.
Additional Information
Application Note
RAVENOL TSi SAE 10W-40 is suitable for all modern cars with petrol and diesel engines all the year; no sludge in the motor, excellent results during the test run. High engine cleanliness is guaranteed also in case of turbo charging and a complete catalyst operation as well as multi valves and diesel direct injections.
Characteristics
- High abrasion resistance
- Fuel saving because of easy running characteristics
- Excellent detergent and dispersant characteristics
- Prevention of black sludge creation
- Long endurance because of high oxidation stability
- Excellent cold start performance
- Very good viscosity temperature behaviour
- Low evaporation
- Suitable for catalysts
Technical Product Data
| Property | Unit | Data | Audit |
|---|---|---|---|
| Density at 20 °C | kg/m³ | 862,0 | EN ISO 12185 |
| Colour | brown | VISUELL | |
| Viscosity at 100 °C | mm²/s | 14,5 | DIN 51562-1 |
| Viscosity at 40 °C | mm²/s | 97,7 | DIN 51562-1 |
| Viscosity Index VI | 153 | DIN ISO 2909 | |
| HTHS Viscosity at 150 °C | mPa*s | 4,03 | ASTM D5481 |
| CCS Viscosity at -25 °C | mPa*s | 5940 | ASTM D5293 |
| Low Temp. Pumping viscosity (MRV) at -30 °C | mPa*s | 20.800 | ASTM D4684 |
| Pourpoint | °C | -42 | DIN ISO 3016 |
| Noack Volatility | % wt. | 9,5 | ASTM D5800 |
| Flashpoint | °C | 234 | DIN EN ISO 2592 |
| tbn | mg KOH/g | 10,0 | ASTM D2896 |
| Sulphated Ash | % wt. | 1,3 | DIN 51575 |
All indicated data are approximate values and are subject to the commercial fluctuations.
Related products
SEMI-SYNTHETIC ENGINE OIL
RM56 – RM211
SEMI-SYNTHETIC ENGINE OIL
RM57 – RM326
SEMI-SYNTHETIC ENGINE OIL
RM55 – RM189
SEMI-SYNTHETIC ENGINE OIL
RM56 – RM202