简体中文
Viscosity: 5W-20
Specification: API SN Plus, API SP (RC), ILSAC GF-6A
Oil type: Synthetic
Approvals: API SN Plus, API SP Resource Conserving, ILSAC GF-6A
Recommendation: Chrysler MS-6395, Fiat 9.55535-CR1, Ford WSS-M2C925-A, Ford WSS-M2C925-B, Ford WSS-M2C930-A, Ford WSS-M2C930-B, Ford WSS-M2C948-B, Honda/Acura HTO-06, Hyundai, Jaguar Land Rover STJLR.03.5004, KIA, Mazda, Mitsubishi, Nissan, Suzuki, Toyota
Application: Passenger car
Technology: Clean Synto®
RAVENOL VFE SAE 5W-20 is a synthetic, low-friction engine oil with CleanSynto® technology for passenger car gasoline and diesel engines, with and without turbocharging and direct injection.
RAVENOL VFE SAE 5W-20 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.
Because of a considerable fuel saving RAVENOL VFE SAE 5W-20 contributes to protect the environment by reducing the emissions.
RAVENOL VFE SAE 5W-20 minimizes friction, wear and fuel consumption with excellent cold start characteristics.
Suitable for extended oil change intervals where recommended by manufacturer.
Additional Information
Application Note
RAVENOL VFE SAE 5W-20 is an universal fuel-efficient engine oil, a top-quality product for modern passenger cars with gasoline and diesel engines.
Characteristics
- Guaranteed fastest possible lubrication of the engine.
- High fuel economy (FE) effect due to the base oils and additives used.
- Low volatilization tendency, thereby lower oil consumption.
- Provides protection against sludging, coking, varnish and corrosion even under unfavorable operating conditions.
- No oil-related deposits in combustion chambers in the piston ring zone and on valves.
- Ensures the function of the hydraulic tappets at all temperatures.
- Stable engine oil, no NOx oxidation.
- Good soot absorption and dispersion.
- Neutral towards sealing materials
Technical Product Data
| Property | Unit | Data | Audit |
|---|---|---|---|
| Density at 20 °C | kg/m³ | 853,0 | EN ISO 12185 |
| Colour | yellow brown | VISUELL | |
| Viscosity at 100 °C | mm²/s | 8,2 | DIN 51562-1 |
| Viscosity at 40 °C | mm²/s | 47,8 | DIN 51562-1 |
| Viscosity Index VI | 147 | DIN ISO 2909 | |
| HTHS Viscosity at 150 °C | mPa*s | 2,7 | ASTM D5481 |
| CCS Viscosity at -30 °C | mPa*s | 6000 | ASTM D5293 |
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 17500 | ASTM D4684 |
| Pourpoint | °C | -39 | DIN ISO 3016 |
| Noack Volatility | % M/M | 9,0 | ASTM D5800 |
| Flashpoint | °C | 234 | DIN EN ISO 2592 |
| tbn | mg KOH/g | 7,8 | ASTM D2896 |
| Sulphated Ash | %wt. | 0,8 | DIN 51575 |
All indicated data are approximate values and are subject to the commercial fluctuations.
Related products
FULLY SYNTHETIC ENGINE OIL
RM468
FULLY SYNTHETIC ENGINE OIL
RM89 – RM392
FULLY SYNTHETIC ENGINE OIL
RM356
FULLY SYNTHETIC ENGINE OIL
RM98 – RM421
ENGINE OIL
RM76 – RM259
ENGINE OIL
RM474
FULLY SYNTHETIC ENGINE OIL
RM87 – RM406
ENGINE OIL
RM81 – RM332