简体中文
RAVENOL HDS HYDROCRACK DIESEL SPECIFIC 5W-30
RM84 – RM379
RAVENOL HDS Hydrocrack Diesel Specific 5W-30 is a synthetic, Low SAPS low-friction engine oil with CleanSynto® technology for passenger car diesel engines, with and without turbocharging and direct injection.
RAVENOL HDS Hydrocrack Diesel Specific 5W-30 is based on additives with reduced ash content for use in modern passenger car with diesel engines with excellent cold start characteristics, low oil consumption and reduced pollutant emissions. This oil will increase the DPF and TWC life. HTHS- Viscosity >3.5 mPa*s (cP). Developed for fuel economy and energy conserving in EURO VI, EURO V and EURO IV Standard engines with normal and extended oil change intervals (until 50.000 km or 2 years possible).
RAVENOL HDS Hydrocrack Diesel Specific 5W-30 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behavior provides an optimum lubricating safety during the cold run phase.
Because of a considerable fuel saving RAVENOL HDS Hydrocrack Diesel Specific 5W-30 contributes to protect the environment by reducing the emissions.
RAVENOL HDS Hydrocrack Diesel Specific 5W-30 minimizes friction, wear and fuel consumption with excellent cold start characteristics.
Suitable for extended oil change intervals where recommended by manufacturer.
VISCOSITY
5W-30
SPECIFICATIONS
ACEA C4
OIL TYPE
Synthetic
APPROVALS
MB-Approval 226.51, Renault RN0720
APPLICATION
Passenger Car
TECHNOLOGY
Clean Synto®
Additional Information
APPLICATION NOTES
RAVENOL HDS Hydrocrack Diesel Specific 5W-30 is an universal fuel economy engine oil for modern diesel engines with and without turbo charger in passenger cars and vans with extended oil change intervals. Extend the lifespan of the particle filter.
Due to the specific composition is RAVENOL HDS Hydrocrack Diesel Specific 5W-30 excellent suitable for use for several of the latest OEM requirements.
CHARACTERISTICS
- Fuel economy in part and full power operation
- Excellent wear protection and high viscosity index also under high-speed driving conditions, the long life of the engine
- Excellent cold starting characteristics also at low temperatures below -30°C
- A safe lubricant film at high operating temperatures
- Low evaporative tendency, so lower oil consumption
- No deposits in combustion chambers, in the piston ring zone and valves because of oil conditioned
- Neutrality towards sealing materials
- Extended oil change intervals to protect natural resources
TECHNICAL PRODUCT DATA
| Property | Unit | Data | Audit |
|---|---|---|---|
| Density at 20 °C | kg/m³ | 843,0 | EN ISO 12185 |
| Colour | Brown | VISUELL | |
| Viscosity at 100 °C | mm²/s | 12,1 | DIN 51562-1 |
| Viscosity at 40 °C | mm²/s | 72,0 | DIN 51562-1 |
| Viscosity Index VI | 166 | DIN ISO 2909 | |
| HTHS Viscosity at 150 °C | mPa*s | 3,6 | ASTM D5481 |
| CCS Viscosity at -30 °C | mPa*s | 5500 | ASTM D5293 |
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 19.100 | ASTM D4684 |
| Pourpoint | °C | -39 | DIN ISO 3016 |
| Noack Volatility | % M/M | 7,6 | ASTM D5800 |
| Flashpoint | °C | 236 | DIN EN ISO 2592 |
| tbn | mg KOH/g | 7,9 | ASTM D2896 |
| Sulphated Ash | %wt. | 0,49 | DIN 51575 |
All indicated data are approximate values and are subject to the commercial fluctuations.
Related products
ENGINE OIL
ENGINE OIL
MOTOR OILS FOR PASSENGER CARS CLEANSYNTO®
MOTOR OILS FOR PASSENGER CARS CLEANSYNTO®